Fluke 82 rf anturi 100kHz-500MHz

B2 Description:
The Model 82RF is similar to the 81RF but with wider bandwidth and slip-on BNC adapter. The ac-to-dc conversion rate at 10 MHz is ±1 dB from 0.25 V to 0.5 V, ±0.5 dB from 0.5 V to 2.0 V, ±1.0 dB from 2.0 V to 5.0 V, ±1.5 dB from 5 V to 30 V in an ambient temperature of 18°C to 28°C. Frequency response is ±1 dB from 100 kHz to 200 MHz, and ±3 dB from 200 MHz to 500 MHz relative to the 10 MHz response.Fluke 82 RF High Frequency RF Digital Multimeter Probe
Comes with what you see in the pictures. If you don't see it, you probably wont get it.
Specifications are from Fluke and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
These units are old stock. They have a number engraved in them on the side. The number may vary from the one in the picture.

Meter Compatibility:

8000A
8010A
8012A
8020A
8022A
8024A
8030A
8040A
8050A
8125A
8200A (Input must be shunted to equal 10 M? on low dc ranges)
8300A (Input must be shunted to equal 10 M? on low dc ranges)
8375A (Input must be shunted to equal 10 M? on low dc ranges)
8400A (Input must be shunted to equal 10 M? on low dc ranges)
8500A (Input must be shunted to equal 10 M? on low dc ranges)
8502A (Input must be shunted to equal 10 M? on low dc ranges)
8520A
8600A (Input must be shunted to equal 10 M? on low dc ranges)
8800A (Input must be shunted to equal 10 M? on low dc ranges)
8810A (Input must be shunted to equal 10 M? on low dc ranges)
8920A (Y9109 Adapter Required)
8921A
8922A (Y9109 Adapter Required)
BNC liittimeen sopiva väliholkki puuttuu, mittapäässä on vain piikkikärki